Air/Water Cooled Parallel Rack Condensing Unit for Contact Plate Freezer

• After-sales Service: Overseas Machinery Service
• Warranty: 1year
• Principle: Reciprocating Compressor
• Mute: Mute
• Lubrication Style: Oil-less
• Drive Mode: Electric
• Model NO.: ICU050-R4A, ICU060-R4A, ICU080-R4A, ICU0100-R4A
• Configuration: Stationary
• Power Source: AC Power
• Material: Stainless Steel
• Use for: Hotels, Restaurants, Medicines, Agricutureral
• Cooling Capacity: 8060-95600
• Refrigerant: R22/R404A
• Power: Various(Can Be Customized)
• Transport Package: Wooden Case
• Specification: 20GP container
• Trademark: ICESTA
• Origin: Shenzhen China
• Production Capacity: 8000sets/Year

Product Description

 Product Introduction
The Parallel compressor type condensing unit produced by our company has the following characteristics:
1. Compared with a single-unit compression condensing unit, the initial investment of parallel units under the condition of the same warehouse cooling capacity can save about 10%;

2. The power consumption is less than that of a single-unit compression condensing unit under the same conditions, saving more than 15% of energy consumption;

3. The cooling speed is fast. Compared with the single-unit compression condensing unit with the same conditions, the parallel unit can quickly reduce the temperature of the warehouse when there is stock in the warehouse, and improve the utilization rate of the warehouse;

4. The unit is integrated, which is convenient for construction and installation, and convenient for centralized maintenance and management.
Each unit produced by our company has undergone drying, vacuuming, leak detection and 2.4MPa pressure test, and protective nitrogen filling for transportation and inspection. All electrical components are easy to maintain, adjust and overhaul.

The unit has been connected to all piping and electrical lines by the factory, ready to be installed and used.When installing,only need to connect the liquid pipe and gas pipe,control circuit and main power line that connect the air cooler and the compression condensing unit.

Application Industry
ICESTA Industrial condensing unit is available for all kinds of Low temperature, Mid, and high temperature cold room,Quick Freezer rooms, which mainly apply for Food industry like cheese, seafood,meat, ,fruit jams,vegetable, etc and Cold chains,etc

Technical Parameters

Specification of Air Cooled Condensing Units

Model			LCUSA-50	LCUSA-60	LCUSA-80	LCUSA-100	LCUSA-120
Cooling Capacity (w)	Evaporating Temp	5	17000	21050	25150	32769	38111
		0	14300	16950	21168	27581	26963
		-10	12070	14220	14818	19307	22454
		-15	8300	11850	12198	15893	18483
		-20	6700	8000	9978	13000	15119
		-25	5500	6470	8063	10506	12218
Norminal Power Consumption(W)			4510	6470	6190	7770	8910
Applicable Room Temp			-20^10
Refrigerant			R404A
Defrost			Electric
Throttling mode			Thermal Expansion Valve
Compressor			Semi-Hermetic Reciporating, Hermetic Scroll
Pipe Spec	Liquid Supply  (mm)		12.7	12.7	12.7	15.88	15.88
	Suction Pipe (mm)		19.05	19.05	28.86	28.86	35
Weight of the Unit (kG)			65	70	110	120	130

Advantages of Air cooled Condensing Unit
1. Easy to Install and maintain
2. High efficiency of Heat Exchange and Long Life Time
3. Compact Design & Reasonable Air Ventilation Design & Efficient Heat Transfer
4. Container Design with Small Footprint, and Long worn-out time of control system

Application Scope
Fresh Keeping, Food Processing, Chemistry and Pharma, Refrigeration and Ice Making, Cold Store, Cold Storing Facilities, Agriculture

Specification of Water Cooled Condensing Units

Model		10HP Water Cooled Condensing Unit (LCUSW-10)			20HP Water Cooled Condensing Unit(LCUSW-20)
			Copeland	GEA		Copeland	GEA
		4PES-12 (Y)	ZB76KQE	HG(X)44e/565-4	4GE-23 (Y)	ZB76KQE*2	HG(X)56e/995-4
Target Room Temp		-18
Refrigerant		R22/R404A
Power Supply		380V, 3P, 50Hz
Air cooler Qty		1-3 units (optional)
Norminal working  Conditions	Cooling  Capacity/PowerConsumption (kW)	11.7/6.77	11.25/6.5	13.4/6.5	23.4/13.7	11.25*2/6.5*2	23.3/11.3
Liquid Supply Pipe		1-3/8"			2-1/8"
Suction Pipe		1/2"			5/8"
Condenser Water in/Out		30C/35C
Evaporating Temp		-25

Model		30HP Water Cooled Condensing Unit (LCUSW-30)			40HP Water Cooled Condensing Unit(LCUSW-40)
			Copeland	GEA		Copeland	GEA
		6GE-34 (Y)	ZB114KQE*2	HG(X)44e/565-4	4GE-23 (Y)	ZB76KQE*4	HG(X)56e/995-4
Target Room Temp		-18
Refrigerant		R22/R404A
Power Supply		380V, 3P, 50Hz
Air cooler Qty		1-3 units (optional)
Norminal working  Conditions	Cooling  Capacity/PowerConsumption (kW)	35.2/20.7	16.5*2/10.5*2	38.2/17.7	41.5/25.3	11.25*4/6.5*4	43.8/20.4
Liquid Supply Pipe		5/8"			7/8"
Suction Pipe		2-5/8"			2-5/8"
Condenser Water in/Out		30C/35C
Evaporating Temp		-25

Model		50HP Water Cooled Condensing Unit (LCUSW-50)			60HP Water Cooled Condensing Unit(LCUSW-20)
			Copeland	GEA		Copeland	GEA
		HSN6461-500(Y)	N/G	HG(X)88e/2735-4	HSN7475-60(Y)	ZB114KQE*4	HG(X)66e/1750-4*2
Target Room Temp		-18
Refrigerant		R22/R404A
Power Supply		380V, 3P, 50Hz
Air cooler Qty		1-3 units (optional)
Norminal working  Conditions	Cooling  Capacity/PowerConsumption (kW)	70.3/40.9	N/G	66.5/37.3	85.8/48.9	16.5*4/10.5*4	84.2/46.4
Liquid Supply Pipe		7/8"			1-1/8"
Suction Pipe		2.5"			3"
Condenser Water in/Out		30C/35C
Evaporating Temp		-25

Model		75HP Water Cooled Condensing Unit			100HP Water Cooled Condensing Unit
			Copeland	GEA		Copeland	GEA
		HSN7471-75(Y)	N/G	HG(X)66e/2070-4*2	HSN8571-125(Y)	N/G	HG(X)66e/1750-4*3
Target Room Temp		-18
Refrigerant		R22/R404A
Power Supply		380V, 3P, 50Hz
Air cooler Qty		1-3 units (optional)
Norminal working  Conditions	Cooling  Capacity/PowerConsumption (kW)	102.3/58.3	N/G	99/54.8	168.9/92.7	N/G	158.5/54.8
Liquid Supply Pipe		1-1/8"			1-5/8"
Suction Pipe		3"			3.5"
Condenser Water in/Out		30C/35C
Evaporating Temp		-25

Advantages of Air cooled Condensing Unit
1. Easy to Remove and Clean
2. Expandable
3.High Efficiency
4.Compact Size
5. Close Approach Temperature
6. Multiple Duties in a Single Unit
7. Avoid cross contamination
8. Lower Costs

Application Scope
Fresh Keeping, Food Processing, Chemistry and Pharma, Refrigerationand Ice Making.Cold Store, Cold Storing Facilities, Agriculture

3D DIAGRAM DISPLAY
Picture Display
ENGINEERING CASE
Product Hot Sale
ICESTA
20 years dedication in ice making technology to create excellence.

Shenzhen Brother Ice System Co., Ltd. ( ICESTA Brand), a well-known ice machine manufacturer and industry leader and pioneer in China.The product covers flake ice /Block ice machine, Tube ice /slurry ice/plate ice/cube ice machines, water chillers,Plate/spiral/blast freezers, Automatic ice storing & delivery system with integrated container ice system,artificial snow making machine.etc

Experiences & History:
20-Years Team focus on innovative solution in Ice & Cooling technology.
16-Years Professional Manufacturer, Supplier of Excellent Turnkey ice & cooling projects.

Industry status& Reputation:
* TOP 3 of China industrial ice machine Brand with strong capability of R&D
* 20000 sqm. Factory
* ISO 9001 , CE, PED, ASME (U.S ) Certificates etc

Technology & Management capability:
* 80+ patents Certificates
* High Technology enterprise Certificate

Services & Global Net:
* Export to 80+ countries
* Local service in 50+ countries with networks all over the world.
* 1-2 years warranty covers each component.

FAQ

FAQ (Frequently Asked Questions)

1. Questions before quotation
A. Would you make ice from seawater, saltwater or freshwater?
B. Where and when would the machine be installed roughly?The ambient temperature and water inlet temperature?
C. What's the power supply?
D. What is the application of the flake ice produced?
E. Which cooling mode would you prefer to? Water or air ,Evaporative cooling?

2. Installation & commissioning
A. Installed by customers according to the manuals, online instructions and live video conference of ICESTA.
B. Installed by ICESTA engineers.
a. ICESTA would arrange 1~3 engineers based on the projects to the installation sites for the final supervision of all
installations and commissioning.
b. Customers need to provide local accommodation and round-trip ticket for our engineers and pay for the commissions. US Dollars
100 per engineer per day.
c. Power, water, installation tools and spare parts need to be ready before ICESTA engineers arrive.

3. Warranty & Technical support
A. 1 year after Bill of Lading date.
B. Any failure occurred within the period due to our responsibility, ICESTA will supply the spare parts for free.
C.ICESTA provide full technical support and training courses after equipment installation and commissioning.
C. Permanent technical support & consultation all life long for the machines.
D. Over 25 engineers for instant after-sale services and more than 15 are available for serving overseas.
365 days X 7 X 24 hours phone / EMAIL assistance

4. Failure Claim procedures
a. Detailed written failure description is required by fax or by mail, indicating the relevant equipment information and detailed
description of failure.
b. Relevant pictures are required for failure confirmation.
c. ICESTA engineering and after-sales service team will check and form a diagnosis report.
d. Further trouble-shooting solutions will be offered to customers within 24 hours after receiving the written description and pictures